Are you looking for some handmade swords for sale? Well, before you do your search, it is essential to know how these swords are made. Sword making is not that easy at all. There is a whole process involved with certain important steps. Throughout the history, different methods have been adopted for making swords. Also, different materials were used for manufacturing them. For example. The earliest swords were made of copper, but then copper was replaced by iron. But, then bronze became popular material for manufacturing swords, and eventually, the humans started making swords with steel. Steel emerged as the finest and strongest material compared to all others.
But, are you familiar with the procedure involved in making swords. If don’t, here is a disclosure of a few significant steps in constructing swords.
i- Forging
Forging is the beginning process involved in the sword making. A bar of required combination of metals is heated in a forge and hammered into the required shape. The process of hammering often takes a very long time, and this process is known as drawing out the sword. Then, the sword is worked on in sections, typically 6 inches long. The sword is then hammered repeatedly and heated unless it gets to the required shape of a sword. This procedure is repeated quite a few times in order to achieve the required shape. Then, it is heated and finally allowed to cool down without influencing any hammering. This is needed by the metal for keeping the desired properties of flexibility and strength. Upon the completion of this step, the sword gets the appropriate shape. However, the properties of metal make it a little brittle and to give it flexibility, something needs to be done.
ii- Annealing
Annealing is the process for softening the sword and making it easy to grind into the required shape. Then, the sword is left to be heated and then allowed to cool down at a slow pace. At times, the sword is wrapped into an insulating material for slowing the cooling procedure. Often, it takes around 24 hours, and the procedure of annealing makes the sword easy to grind and soft.
iii- Grinding
At this stage, the grinder is used for working out the point as well as the edges of the sword. This is done at the same time engraving is being added. However, the sword is not ready to be used at the moment. At this stage, it is required to harden the sword to some extent because it is far too soft.
iv- Hardening
At this stage of the sword making process, the sword is heated at a relatively higher temperature. Then, it is placed into a quenching tank. Such procedures of making the swords are often seen in the movies. The process of quenching is an important one because it lets the sword cool at a quick pace to harden the metal. Once the procedure of hardening ends, the sword become brittle and something needs to be done for making it powerful, but maintaining its flexibility.
V- Tempering
The blade is again heated, and the process of quenching takes place. However, this time, the blade should be heated at a relatively lower temperature. The cycle of quenching/heating is repeated quite a few times. The tempering process is useful in making the blade stronger, and not brittle. Some flexibility would be retained by the sword along with the sharpness of the edges. By now, the sword is almost completed.
Your Sword is Made!
The sword is almost completed when the blade is made. However, the final accessories, such as hilt and pommel are added to make it a complete. So, your sword is ready to be used for battling your enemies!
